空调器用盘式电机的计算机模拟

介绍线绕盘式永磁直流电流电动机的结构特点，设计原则和有关的主要设计公式，并进行电机的计算机模拟。模拟运行结果与样机实测数据基本相符。     

秦山核电厂核空气净化系统试验与运行

本文介绍了秦山核电厂核空气净化系统的设置,系统功能及运行方式,净化部件的性能参数。文章着重叙述安装工作完成后所进行的现场试验的项目、目的、方法和评价标准。已完成的现场试验证实,秦山核电站核空气净化系统将是可靠高效率的,文章最后介绍了运行管理的要点,指出强化运行管理是核空气净化系统能否发挥预定功能的关键。目前,秦山核电站正向满功率进军,核空气净化系统运行正常,满足了秦山核电厂安全运行的要求。     

鼓风引射式燃气燃烧器的计算

提出鼓风式射式燃气燃烧器的基本计算公式与计算结果，并进行结构尺寸与工况分析，确定各种因素对其的影响程度。     

用废旧橡胶生产精细胶粉的空气涡轮制冷低温粉碎法

利用先进的空气涡轮制冷系统，在低温条件下，将废旧橡胶进行冷冻，粉碎，制成60目以上细度的精细胶粉，此法简称ATCG法，它的冷冻能耗成本仅为国际上通用的液氮法的十分之一，整个工艺过程不产生二次污染，为精细胶粉的制取开辟了一条新途径。     

除尘改造设计中风量平衡分析

详细说明除尘设计改造中风量的压力损失计算，风量平衡过程及通风管道直径和走向的确定。     

A comparison of leaf-spring with aircushion trailer suspensions in the transport environment

Packaging engineers need to be able to accurately determine the forces present in the shipping environment in order to protect packaged goods. The purpose of this study was to determine the vertical vibration levels measured in three separate truck-trailer suspension systems; conventional leaf-spring, conventional air-ride and damaged air-ride. The main conclusion reached in this study is that the air-ride suspension when maintained gives lower power density (PD) levels on all road surfaces studied. A damaged air-ride suspension and leaf-spring suspension are very similar in response frequencies, although the damaged air-ride produces higher vibration levels at lower frequencies.     

空气中烧成的镍导体及其应用

将空气中烧成的镍导体用于散热制冷片制作工艺中，可降低成本，提高合格率。通过实验得到的最佳值为：镍导体中４号玻璃（ＳｉＯ２＞３０，Ｂ２Ｏ３＞１０，ＰｂＯ＜５５，ＴｉＯ２少许）的含量４．５％，化学镀镍时间５０ｍｉｎ，方阻４７．５ｍΩ／□，附着力８．１Ｎ／ｍｍ２。     

A Model for Through Drying of Tissue Paper at Constant Pressure Drop and High Drying Intensity

A mathematical model for through drying of paper at constant pressure drop was developed. The model is based on physical properties; hence, basis weight, pressure drop, drying air temperature, pore size distribution, initial gas fraction, and tortuosity are important input parameters to the model. The model was solved for different combinations of the variables basis weight, drying air temperature, and pressure drop corresponding to industrial conditions and the results were compared with data from bench-scale experiments. The simulations show that the drying rate curve is very sensitive to the air flow rate and that correctly modeling the correlation between pressure drop and air flow rate is the most important factor for a successful model for through drying. The model was tuned by adjusting the parameters initial gas fraction and tortuosity in order to give the best possible fit to experimental data. For a given basis weight and pressure drop, different drying air temperatures resulted in relatively constant values of the fitted parameters. This means that the model can well predict the effects of changes in drying air temperature based on a tuning of the model performed at the same basis weight and pressure drop. However, for a given basis weight, an increase in pressure drop yielded fitted parameters that were somewhat different; i.e., a lower initial gas fraction and a higher tortuosity, a change that increases the resistance to air flow. This implies that the correlation between pressure drop and air flow rate in the model does not quite capture the nonlinear relationship shown by the experiments.     

气囊在建筑施工中的应用

对气囊在路基压实密度检测、空心板梁制作和大型混凝土构件搬运中的运用进行了分析,指出将气囊这种先进的施工工艺应用到建筑施工中,加快了施工进度,确保了工程施工质量,并降低了工程施工成本,值得推广使用。     

非标准工况下空分设备增产氩的研究与实践

文章对非标准工况下的空分设备增产氩措施进行了研究。以宝钢6#60000m3/h空分设备为例,通过设计型算法和校核型算法,建立了空分设备精馏的数学模型,通过改变数学模型的参数,分析了在非标准工况下精馏塔内的组分浓度分布,并提出了优化后的操作方案和操作参数,实施后提高了空分设备的氩提取率,取得了显著的经济效益。